Treadle Sewing Machine

A treadle sewing machine works with electricity. It works efficiently and what’s good about it is that it is not expensive. Even if it is inexpensive, you can rest assured that it is durable. If you will manage to take care of it properly, you and the machine will be working together for such a long time. Below are some useful tips on how to take care of your treadle sewing machine:

Proper caring for this machine includes thorough oiling. For this, you have to use a lubricant which is intended for sewing machines. Doing this will make the machine do a great job all of the time. Rusting and becoming gummy will also be avoided. When oiling the equipment, you should also pay attention to the parts that rub each other whenever the machine is sewing. There are certain oil holes on its head and you can pour oil in them. You should also do that on the lower parts of the machine.

If your treadle sewing machine gets so dirty in time, or if it starts to run roughly, you can clean it by pouring a small amount of kerosene into the oil ports. You can use an oil can for the kerosene so it can easily be poured on the parts that you will clean. After cleaning, turn the machine on for a few minutes to see how it will run. If you are using the machine frequently, then, you should do the lubrication more often. It is advisable for heavy users to oil it daily.

Pay attention to the drive belt as well. It should not be too tight or too loose. If it is loose, you can punch a new hole on it and adjust the buckle.

When you feel tension while sewing, you need to check your needle because the problem might be there. Always remember that you should use a needle which is sharp and unbent; therefore, if it bends or becomes blunt, you should replace it. Sometimes, this problem may be caused by using the wrong size of needle; hence, ensure that you are using the right needle for your machine.

If the problem is not in the needle, try adjusting the controls. There might be something wrong about the configuration. You can locate the tension adjustment on the machine’s head. It is usually a thumbscrew. There is also a control at the lower portion which when turned clockwise will increase the pulling of the thread. There might be a need to reset everything if the mechanism totally stopped stitching.

When you purchase a treadle sewing machine, you will also get a manual that has all the instructions that you need. It normally indicates how to set up the machine, how to take care of it, how to fix troubles and so on. Just read through the pages of the manual and you will surely find the guidance that you are looking for.

If you wish to enhance your knowledge on how to take care and maintain the equipment, or perhaps be able to repair the machine by yourself; then, you can buy a repair book which is specially written for the treadle sewing machine. A book such as this is usually sold at bookstores. There may also be e-books that you can get at the net. If you are a diligent searcher, you might be lucky enough to find free information and tips online. If you cannot fix the problem by yourself, you can seek the help of a professional repairman.

Sewers who have turned their backs on sewing will be encouraged to start sewing again with a treadle sewing machine. Those who are still at the point of learning how to sew will definitely get it right this time with the help of this mechanism. Therefore, making it last longer is truly rewarding. You can even pass it on to the next generation.

This Treadle Sewing Machine Review is Written/Updated on Jun 22nd, 2009 and filed under Home Appliances. Both comments and pings are currently closed.

Comments are closed