High Efficiency Shower Head

There are numerous reasons to lower for people to want to lower their water consumption. In several areas, water bills are high, prompting consumers to look for ways to use less water. In other situations, people simply want to use less water. There are a number of ways that people can lessen the amount of water they use, and most of them take hardly any effort. The bathroom is the one room that uses a big percentage of your household water. You can start using less water in the bathroom simply by installing a high efficiency shower head. A standard shower head is the hardware at the end of a water source that disperses water to provide an even flow of water under which you can shower. Shower heads have small holes on the surface of the shower fixture that face the bather.

Previous to 1992, some showerheads had flow rates of 5.5 gpm which caused them to use a significant amount of water. This is when the Federal Energy Policy Act of 1992 was implemented. This act requires that all faucet fixtures manufactured in the United States lessen the maximum water flow at or below 2.5 gallons per minute (gpm) at 80 pounds per square inch (psi) of water pressure or 2.2 gpm at 60 psi. Therefore, if you have older shower heads you will certainly definitely want to replace it with a high efficiency shower head to save your water usage while showering. Newly built homes must use high efficiency shower heads. The newer high efficiency shower heads possess a flow rate of less than 2.5 gpm, which is what a standard shower head uses today. A high efficiency shower head has a flow rate of only 1.5 gpm or less and are much better at conserving water. A homeowner can save thousands of gallons of water and hundreds of dollars on their water bill if they only install a high efficiency shower head. There are two fundamental types of low-flow showerheads now, aerating type and laminar-flow types. Aerating showerheads combine air with water and create a misty spray with which to shower. Laminar-flow showerheads provide individual streams of water. The laminar flow types are more effective for use in humid areas given that they really don’t produce as much steam. Most shower heads are manufactured from a heavy-duty molded plastic and can be aluminum, chrome or gold plated to complement the interior d├ęcor within the bathroom.

Shower heads are normally mounted high on the wall inside the shower stall. The majority of bathtubs include a switch on the faucet that is used to transfer the water stream to come from the shower head. Ordinarily the average consumer will benefit more by using a high efficiency shower head which is designed specifically for reduced flow rates. Extremely high efficiency shower heads contain only a few holes in them which incorporate resistance against the flow of water to produce powerful projections. Approximately 73% of the water used in a typical shower is hot water. Reasonably priced and simple-to-install, low-flow showerheads aerators can also help to eliminate home water consumption and water heating expenses by as much as 50%.

Shower heads are really easy to install since most manufacturers comply with a standard fitting that is interchangeable. A simple wrench is necessary to loosen the connection and the shower head can be taken off by simply twisting it off. The opening from which the shower head is mounted needs to be sealed to prevent water from running behind the wall. Shower heads should be removed from time to time for cleaning to get rid of mineral deposits. Getting the proper shower head is imperative to save water. When contemplating purchasing one, you can find out more about them from reading consumer reviews. You can find high efficiency brand name shower heads at local hardware stores as well as online.

This High Efficiency Shower Head Review is Written/Updated on Dec 30th, 2010 and filed under Home Improvement. Both comments and pings are currently closed.

Comments are closed